Analysis of the Low-Temperature Curing Characteristics of Flexible Packaging Polyurethane Adhesives
2026,11,17
Low-temperature curing is an important direction in the field of flexible packaging composites. The low-temperature reaction activity of polyurethane adhesives directly determines the composite yield rate in winter production and in low-temperature workshops, and is also a core indicator for selecting energy-saving processes.
The curing of polyurethane adhesives relies on the gradual cross-linking reaction between isocyanate groups and hydroxyl groups. Temperature significantly affects the reaction rate. In conventional adhesives, in low-temperature environments, molecular movement slows down, the probability of group collisions decreases, and the curing period is significantly prolonged, which easily leads to incomplete curing problems, manifested as low peel strength, high residual monomers, and deteriorated later medium resistance performance.
Low-temperature polyurethane adhesives improve the curing process by optimizing the molecular structure, adjusting the ratio of polyols and curing agents, and enhancing the reaction sensitivity of active groups. They can still steadily build a dense cross-linked network at lower temperatures. However, low-temperature curing is not necessarily better at lower temperatures; too low an environmental temperature will bring risks of reduced adhesive fluidity and insufficient wetting, and the water vapor on the substrate surface is more likely to trigger side reactions.
In actual production control, when using low-temperature cured adhesives, it is necessary to ensure stable temperature and humidity in the workshop, control the applicable period after mixing the adhesives; at the same time, control the uniformity of the temperature in the curing room to avoid inconsistent curing caused by local temperature differences. Even if using low-temperature active adhesives, the curing time according to the process requirements must be completed, and the production efficiency and the safety, medium resistance, and migration resistance of the composite film cannot be sacrificed solely by shortening the curing time. The comprehensive performance such as adaptability to more flexible packaging production scenarios must also be considered.