Uniformity of coating application for flexible packaging polyurethane adhesives: A brief analysis
2026,11,18
Uniformity of coating application is a fundamental control point in the flexible packaging laminating process, directly influencing the peel stability, appearance, and long-term performance of the composite film. It is also a key point for the application and control of polyurethane adhesives.
After the
Polyurethane Adhesive is mixed and stirred, it is transferred to the substrate surface by the coating roller. Uneven thickness of the adhesive layer can lead to various defects. Local insufficient adhesive application results in insufficient adhesion, which may cause local delamination and low peel strength; areas with excessive adhesive application have concentrated heat release during crosslinking, inconsistent curing process, and may also cause wrinkles, bubbles, and stickiness. At the same time, it increases the risk of migration.
The uniformity of coating application is constrained by multiple factors. The rheological properties of the adhesive itself are crucial. Excessive variation in viscosity with temperature and inappropriate thixotropy can cause unstable coating application. In terms of coating equipment, the mesh count of the screen roller, the gap between the scraper, the surface accuracy of the roller, and the tension of the film movement all affect the transfer effect of the adhesive layer. Additionally, fluctuations in the corona value of the substrate surface, as well as surface dust and oil stains, can interfere with the spread of the adhesive solution.
During production, it is necessary to stabilize the temperature of the adhesive solution and the mixing time to ensure stable viscosity; regularly calibrate the screen roller and clean the roller surface to control the stable tension of the film movement. At the same time, perform pre-treatment inspection of the substrate, take samples for testing the distribution of the adhesive layer during the trial run, and promptly adjust the process. Only with a stable and uniform adhesive layer can the polyurethane adhesive fully crosslink, ensuring that the appearance, media resistance, and boiling resistance of the composite film reach a stable and consistent level.