Causes and process optimization of delamination and foaming of flexible packaging polyurethane laminating adhesive after boiling and cooking
2026,10,09
In the production of flexible packaging high-temperature cooking products, special polyurethane laminating adhesive is the core to ensure the temperature resistance of packaging. The bonding strength of many composite products is normal at room temperature, but after boiling water and high-temperature cooking and sterilization, there are some defects, such as interlayer foaming, large-scale delamination, strength collapse and so on, which is the most typical and influential glue system failure problem of cooking soft bags, and it is easy to cause batch scrapping and customer complaints.
Insufficient crosslinking of flexible
Polyurethane Adhesive is the root cause of cooking failure. The ratio deviation of two-component polyurethane adhesive and insufficient addition of curing agent will lead to low cross-linking density of adhesive layer and loose polymer network structure. In the cooking environment of high temperature and high humidity, water vapor quickly penetrates into the glue layer, destroying the intermolecular force, causing the glue layer to hydrolyze and soften, losing cohesion, and directly causing delamination and bubbling between layers.
Auxiliary materials and process defects will aggravate poor cooking. The use of ethyl acetate containing water and impurities exceeding the standard will consume the active components of curing agent in advance and weaken the hydrolysis resistance of flexible polyurethane adhesive; The coating dry weight is too low and the adhesive layer is too thin, so it is impossible to form a complete protective film, and water vapor easily penetrates the interface. At the same time, the curing temperature is low, the time is insufficient, the colloid is not completely cured, and the ability to withstand cooking impact will be greatly reduced.
Targeted improvement can stabilize cooking quality. Cooking soft bags must use special polyurethanelamianting adhesive for cooking resistance, and avoid the substitution of general adhesive. Production of strict and accurate proportion of glue, the use of high-purity anhydrous solvent, to ensure that the glue layer is fully crosslinked. Standardize the coating dry amount, ensure the uniform and full adhesive layer, and strictly implement the standard curing process. The finished products are simulated in advance, so as to avoid the problem of delamination and foaming in cooking from the aspects of material selection, technology and detection.