The poor adaptability of polyurethane laminating adhesives to high and low temperatures, as well as the cracking and delamination in cold and hot environments, can be addressed by the following solutions:
2026,10,06
When flexible packaging products are transported in a cold chain, stored at low temperatures, or exposed to high heat and direct sunlight, they are prone to problems such as low-temperature cracking and high-temperature softening and delamination. While the composite strength is normal at room temperature, the stability is extremely poor under extreme temperature differences. These defects are typical of insufficient weather resistance of the adhesive system and are not just routine process flaws. They are also common complaints in frozen packaging and outdoor transportation packaging.
The adhesive formula system is the core key to the temperature difference resistance performance. The crosslinking structure of ordinary general-purpose polyurethane adhesives is unbalanced in rigidity and toughness, and in the high-temperature environment, the adhesive body is prone to softening and the internal cohesion decreases, resulting in interlayer sliding and delamination. In the low-temperature environment, the molecular chains of the adhesive layer are stiff and lack toughness, and when the substrate bends and stretches, it cannot follow the shape and extend, thereby causing brittle cracking and micro-cracks in the adhesive layer, leading to local delamination and air leakage.
Improper process matching can weaken the weather resistance. If the coating thickness is too thin, the adhesive layer's buffering toughness is insufficient, unable to counteract the expansion and contraction stress caused by alternating cold and hot temperatures; if the curing is not thorough or the crosslinking density is low, the adhesive layer structure becomes loose, and the ability to withstand high and low temperature impacts significantly decreases. In addition, when the base material tension is not matched and the membrane material expansion coefficients are different, the deformation of the substrate varies with temperature changes, which further exacerbates the cracking and delamination of the adhesive layer.
Targeted optimization can effectively enhance the product's weather resistance. For products in high and low temperature conditions, a weather-resistant modified
Polyurethane Adhesive should be selected, taking into account the high-temperature anti-rheology and low-temperature anti-cracking performance. Production should strictly control the coating dry weight to ensure that the adhesive layer has sufficient toughness and buffering space, and strictly implement the curing process to improve the adhesive layer's crosslink density. At the same time, precisely match the base material's composite tension to reduce the deformation stress caused by temperature changes and completely solve the delamination and brittle failure problems in extreme environments.